The most common type of voltage from a central heating and/or cooling system is 24 volts (24Vac). The old thermostat may say somewhere on the thermostat that it is for 24 volt (24Vac) or maximum 30 volts (30Vac). If you see 120 Vac or 240 Vac on the thermostat, aRead More →
In most cars the thermostat is placed under a housing near the water pump on the cylinder head ; the housing is connected directly to the top radiator hose . In a few cars the thermostat is housed near the bottom hose. Test the thermostat quickly by starting the engineRead More →
The bare minimum for the Nest Thermostat to operate is 3.6V, which is the most common reading for a Nest battery. If the thermostat is installed for more than 24 hours, the voltage should go up. The Nest Thermostat battery works perfectly. What voltage does Nest need? A typical readingRead More →
Your thermostat will read the wrong temperature if it isn’t located in your home’s most optimal place. If it’s located near drafts or heat sources, or it’s in an area that isn’t centrally located, you may need to have it moved. If you can’t fix your thermostat problems, contact anRead More →
You can save as much as 10% a year on heating and cooling by simply turning your thermostat back 7°-10°F for 8 hours a day from its normal setting. The percentage of savings from setback is greater for buildings in milder climates than for those in more severe climates. IsRead More →
Most programmable thermostats have a pre-programmed setting that’s supposed to be for the typical American family. … You need to adjust the thermostat’s settings so it’s in sync with the life you and your family lead instead of some mythical family. Programming options are based on: Wake Time. What isRead More →
A thermostat can be recording the wrong temperature for a variety of reasons: Your thermostat’s sensor is malfunctioning. In some cases, a sensor can be recording the wrong temperature. A simple recalibration can often do the trick. What can affect a thermostat? 6 Common Problems That Affect Your Thermostat DirectRead More →
There are several types of replacement repair thermostats, also known as potentiometers and fixed or bi-metal thermostats. These are commonly safety thermostats that will turn the equipment off if a temperature exceeds a certain set point. Is a thermostat a control system? A thermostat operates as a “closed loop” controlRead More →
In most cases, leaving the thermostat temperature constant is aimed at keeping the thermal energy (heat) inside the homes constant. Consequently, inside the house will often be warmer than the outside. … The higher the temperature difference between the two points, the faster the heat loss to the surrounding area.Read More →