Baths and/or shower trays are installed at 1st fix stage as they need to be fitted prior to the commencement of tiling. This is essential to get professional watertight seals, as water ingress resulting from doing things in the wrong order can cause massive problems later on.
Do you tile underneath a freestanding tub?
While it’s not necessary to tile around a freestanding tub, if the freestanding tub is against a wall, you’ll need to protect the wall from water damage. Tile is not the only option. Alternatives include wainscot, glass brick, and mildew-resistant paint.
Do you need to waterproof under a bathtub?
A properly completed tiled bathroom does not leak and cracking a tile only happens if you drop something heavy onto it! As a result, waterproofing underneath a tub is not generally done unless it’s something like a clawfoot tub.
How close can a tub be to tile?
Bathtubs, believe it or not, will expand when filled with water. Leaving a 1/16″ gap between the tub and tile will prevent the tile from cracking when the tub expands. Plus, a 1/16″ gap allows the caulk to properly fill the space and waterproof the transition between the tile and tub or shower.
What order should I tile my bathroom?
Why You Should Tile the Wall First
On the flip side, tiling the walls first will help you dodge the mishaps and messes associated with tile and mortar. In order to have a better outcome with the walls first, you will need to consider how your tiled wall will hang over the floor.
Do you grout between tile and tub?
Grout or Caulk Between Floor Tile and Tub: Which Is Better? … Since you are joining two different materials together, you should use caulk in the space where the floor tile and tub meet. Grout is not flexible, so it’s not the best material for the job, while caulk allows for movement and also provides a better sealant.
Is it OK to tile before drywall?
Sheetrock should be up, second coat taped, sanded, and preferrably atleast primed, if not painted, prior to installing the floor tile. … All that should be left when the tile floor goes in is to install the wood base. Even the door trim should be in already (just undercut it for the tile).
Do you lay floor or wall tiles first?
Whilst you can tile either one first, popular opinion based on experience is that is is easier to tile the walls first and then the floor, if you are tiling both in a room. This ensures that you keep the floor tiles cleaner as you won’t be doing so much work around them once they are installed.
When tiling where do you start?
It’s always advisable to start tiling your grid in the centre of the wall, as it’s easier to make sure your pattern is symmetrical. It also means any half-tiles you may need can go at the end of each row and will be of matching size.
Can you tile over tile in a shower?
So, in short, you can tile over tile as long as you’re working on a fairly sound surface. The surface of the existing tile should be free of mold and mildew, completely level (including grout), and without any warping or strangely-placed tiles that might otherwise interfere with a smooth new layer.
Does the toilet go on top of tile?
5 Answers. The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
Does drywall have to end on stud?
Yes, you need to start and stop drywall on a stud. Every edge of the sheetrock needs to be supported continuously. Cut the sheetrock down so it’s edge is in the middle of a stud. Try to put your cut edge in a corner because the factory edges are tapered so when you tape and mud it ends up flat.
Is drywall supposed to touch the floor?
Drywall should definitely not touch concrete as moisture will wick (ie flow up the surface as in a candle/lamp wick) into the drywall and encourage mold growth. 3/8″ should be sufficient – your prop up plan is not only appropriate, but a common technique used by drywallers.
Is it better to hang drywall vertical or horizontal?
On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. … For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits. Fewer seams. Horizontal hanging reduces the lineal footage of seams by about 25%.
Can I tile a whole wall at once?
depending upon layout with a cut tile as your first row set on a ledger and any borders, you can tile all the walls one day and then the pan and 1st course of wall tiles if they are cut after you remove the ledger.
Should you fill bathtub before caulking?
Kim from London, Ontario suggests filling the bathtub with water before caulking between the tub and the tiles. If you fill the tub first, you sink the tub to start with. … Then caulk and leave the water for at least 24 hours so that caulking has a chance to cure thoroughly.
What do you put between tub and tile?
Grout fills the joints between tiles.
The sole purpose of grout is to fill the spaces between tiles after the tiles have been glued in place on a floor or on a wall. Grout keeps the tiles from shifting, and also protects the edges of tile from chipping. There are two types of grout, sanded and unsanded.
Can I use caulk instead of grout in shower?
Caulk is used to waterproof joints for space like bath tubs, showers, windows etc. Caulk is strong enough to adhere to tile surfaces without crevices. … Caulk may shrink or dry out over time, which is why it shouldn’t be used in large installations or as a replacement for grout.